© Copyright 2009, American Fibertek, Inc. 0205JD Instruction Manual MTX-986-UTP-SL MRX-986-UTP-SL Eight Channel Video Multiplex
10MTX-986-UTP-SL STATUS INDICATORS (cont) OLI 1 A bi-color LED indicator monitors the optical input power of the data signal that is being receive
11MRX-986-UTP-SL STATUS INDICATORS (cont) VLI 1 THROUGH VLI 8 A green LED indicator is provided for the each of the eight video outputs of the MRX-9
12 LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in
2 Table of Contents Functional Description ...3 Installation...
3INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek Series 986-UTP-SL singlemode eight channel v
4INSTALLATION THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOC
5VIDEO INPUT / OUTPUT CONNECTIONS Video input and output connections are located on the rear of the unit. Video input connections on the MTX-986-UTP-
6DATA MODE SWITCHES NOTE: This unit is shipped with Data Channel 1 in the RS422 configuration and Data Channel 2 in a Contact Closure configuration.
7 DATA TERMINATION REQUIREMENTS RS232 Data Signals The RS232 interface standard is a point to point transmission protocol for digital signals. It al
8MTX-986-UTP-SLVIDEO INPUT ADJUSTMENTS The MTX-986-UTP-SL has the ability to individually boost the high frequencies of each of the eight video inpu
9MTX-986-UTP-SLSTATUS INDICATORS The MTX-986-UTP-SL transmitter provides the following front panel LED status indicators to aid in installation and t
Comments to this Manuals